Removing the hard drive on a MacBook is one of the easier maintenance tasks you can perform, and you can have the hard drive extracted in just a couple minutes. Replacing the old drive with a new one is a snap, and then all you'll need to do is reinstall your operating system. Every WSU MacBook hard drive is set up the same way: On a MacBook, all of the space on the single hard drive is assigned to one partition called MacBook Pro/Air # where the number represents the year it was distributed (e.g., MacBook Pro 13). Open your hard drive by double-clicking the MacBook Pro/Air # drive icon on your desktop (Figure 1). How do I use Disk Utility to reformat my hard drive? Open Disk Utility. Select your new hard drive from the sidebar. If you don’t see it, go to View Show All Devices. Click the Erase button at the top of the window. Choose a new name for your Mac’s hard drive. Change the format to Mac OS Extended (Journaled). Replacing a MacBook Pro Hard Drive. Before even starting to replace your MacBook Pro hard drive, you will want to gather your materials: An SSD; A Torx screwdriver; Phillips screwdriver (smaller) A SATA-to-USB cable; Remember that the SSD will impact the performance of your computer, so you do not want to get a cheap model.

Macintosh HD, or the MacBook internal hard drive, is basically the startup drive of most Apple computers. That means if your Mac or MacBook Pro can’t mount its startup disk, it is likely that you will experience problems, like your computer gets stuck on the login screen or it does not boot at all. Situations like this can be very annoying, especially if you have critical and important files stored on the “unmountable” hard drive.

Fret not, because we will teach you what to do if your MacBook Pro won’t mount its startup disk. But before we do that, you better have a backup of all your data.

Backup, Backup, Backup!

Piano mouse software. Before you proceed with fixing the problem, it is best that you back up all your data first. That way, you can easily retrieve or recover your important documents and files in case something goes wrong.

Now, you might be wondering if it is possible to create a backup of your data, especially that your Mac is not even booting. Here’s what you should know: your Mac has a built-in Disk Utility, which can be accessed before startup. To use this, follow the steps below:

1. Get an external hard drive and connect it to your Mac.
2. Switch off your Mac. After five seconds, switch it back on.
3. After hearing the startup sound, press the CMD and R keys. Hold them until the Apple logo appears.
4. The macOS Utilities window will now appear.
5. Choose Disk Utility and hit Continue to proceed.
6. You can now start backing up your data using the external drive. Once you have backed up all your data, you can try a few fixes to your “unmountable” hard drive problems.

4 Fixes to a MacBook Pro That Can’t Mount Its Startup Disk

In most cases, mounting is an automatic process that happens as soon as the hard drive is connected to a Mac or MacBook Pro. Then again, drive mounting can be performed manually using the Disk Utility of your machine. It will be discussed further below. Apple keyboard with cable.

Going forward, assuming you already have a backup of your important files and data, let’s proceed with resolving the problem. Below are a few ways to fix a MacBook Pro that can’t mount its startup disk:

1. Fix Your Hard Drive.

Sometimes, restarting your Mac is more than enough to fix the problem. However, if that does not work, then you might want to look into the angle that there might be something wrong with your hard drive. If that is the case, you have to boot your MacBook Pro in Recovery Mode via Disk Utility.

To hopefully fix your hard drive, follow these steps:

1. Switch off your MacBook Pro.
2. Turn it back on by pressing the Power button. But while doing that, press the CMD and R keys as well until the Apple logo appears.
3. The macOS Utilities window will open. From there, select Disk Utility.
4. From the left pane, choose your MacBook Pro hard drive.
5. Navigate to the First Aid tab.
6. Click the First Aid button to start fixing your drive.
7. Wait for the process to finish before restarting your machine.

2. Run Your MacBook Pro in Safe Mode.

When booted in Safe Mode, your MacBook Pro will start only with the minimum requirements and utilities needed. All other programs and apps that are unnecessary will never be loaded. Hence, if the reason why your startup disk cannot be mounted is a faulty app or program, booting your MacBook Pro in Safe Mode might just fix your problem.

To run your MacBook Pro in Safe Mode, do these:

1. Restart your MacBook Pro.
2. After you hear the startup sound, press the SHIFT key immediately. Continue holding it until the Apple logo appears.
3. If your MacBook Pro boots up properly, then uninstall any program or app you suspect is causing the problem.
4. Restart your machine.

3. Disconnect All External Peripherals.

It is possible that a faulty peripheral connected to your MacBook Pro could be causing your startup disk problems. To verify this, follow the steps below:

1. Switch off your machine.
2. Disconnect all external peripherals connected to your MacBook Pro, including printers, external hard drives, USBs, and scanner. You may leave the keyboard and mouse attached in the meantime.
3. Switch on your Mac. If it boots properly, then one of the peripherals is causing the problem.
4. Identify the exact cause of the problem by connecting each of the peripherals one by one. Make sure you reboot your MacBook Pro every time you connect a peripheral.

4. Reset the SMC and PRAM.

This may sound like a technical solution, but it isn’t. In fact, resetting the SMC and the PRAM takes only a few seconds.

Jixipix rip studio pro 1 1 99. To reset the PRAM and SMC, follow these instructions:

1. Reboot your MacBook Pro.
2. After you hear the startup sound, press the Option, CMD, P, and R keys. Hold them until you hear the second startup tone.
3. Release the keys. Your PRAM will then be reset.
4. Restart your MacBook Pro and check if the problem persists.
5. If resetting the PRAM does not fix the problem, try resetting the SMC. Start by shutting down your MacBook Pro.
6. Plug your machine into a wall outlet.
7. Next, press the CTRL, SHIFT, Option, and Power keys for 10 seconds and release them together.
8. Restart your MacBook Pro and see if it worked.

How to Mount a Startup Disk on MacBook Pro

Live wallpaper windows 10 download. At this point, you probably want to know how to properly mount a startup disk on your MacBook Pro to avoid problems in the future. Well, mounting a startup disk does not literally suggest physically setting it up with all the wires. It simply means making the startup disk available for your system to perform different read and write operations.

If the startup drive is in good shape, your system Disk Utility should see it. Under the Disk Utility window, select your preferred startup disk. Click on it to mount. By now, your new startup disk should be accessible by your operating system.

How To Clean Macbook Pro Laptop Hard Drive

What’s Next?

Macbook Pro Laptop Hard Drive

Now that you know how to deal with your “unmountable” startup disk problem, it’s time that you get your MacBook Pro running fast and smooth by downloading and installing a reliable tool like Outbyte MacRepair. Not only will this tool allow you to conveniently find and fix speed and stability problems, it will also protect your privacy. What more can you ask for from such a powerful tool?

If you know other ways to fix a MacBook Pro that can’t mount its startup disk, please share them with us below. We’re looking forward to hearing from you.